Skip to main content


Industrial media converter 10/100/1000BaseTX to SFP with PoE+
  • Very small design, DIN rail or table mounting
  • Copper port: 10/100/1000, RJ45
  • Copper port with PoE up to PoE+ 30W
  • F.O. port: 100/1000SFP
  • LFP (Link Fault Pass Through)
  • Power: 48-56VDC, redundant
  • Wide temperature range

This industrial media converter is especially developed for applications with a high data load such as video over IP or streaming. Its very compact design, wide temperature range and  high flexibility make this product ideal for the us in remote locations. The media converter disposes of a optical SFP-port and a copper port for 10/100/1000TX which supports PoE 802.3af/at up to 30W.  The media converter is delivered with a clamp for DIN-rail mounting and a clip for wall mounting.

More information

Special featuresLFP (Link Fault Pass Through) can be switched on and off by dip switch.
For stable use of this function, a suitable media converter of the PC series must also be used on the opposite side.
System notesThis media converter cannot be used in combination with the VDSL SFPs of the PD-VDSL-SFP series.

Technical data

General properties
supply voltage48-56VDC, screw terminal
Without power supply unit, must be ordered separately
power consumption2W, without PoE
operating temperature-40° to +75°C
dimensions59 x 36 x 50mm (WxHxD)
Testing standards

EMC: CE, FCC, EN 55032/24
EMI: CISPR 32, FCC Part 15B Class A
EMS: IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV
          IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV
          IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV
Vibration: EN 60068-2-6
Shock: EN 60068-2-27
Free Fall: EN 60068-2-32

copper ports1x10/100/1000BaseTX, RJ45, PoE+
Auto negotiation
optical fibre ports

1 x 100/1000 SFP, LC connector
Data rate of the SFP must be set by dipswitch

We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs of other manufacturers.

network properties
PoE Management
standardsIEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af for POE
IEEE 802.3at for POE+

Product variants


For SFP plug-in unit
LC Connector
Optical data dependent on SFP
Including mounting accessories, without SFP, without power supply

Mounting accessories

Supplied mounting accessories for wall and DIN rail mounting

Version 21.06.2021, Changes without notice