Being developed for tasks with high data volume, this layer-2 switch is suitable for example for video over IP and video streaming in connection with multicast as well. IP-cameras are supplied by PoE through the data cable. With its extensive management possibilities, it is also suitable for complex network structures.
Video network special featuresActive monitoring of the camera
Switch-powered cameras by PoE are constantly monitored. In case of a camera failure the switch automatically restarts the camera. If this is not possible the switch alarms by SNMP.
Active monitoring PoE-supply
The switch alarms by SNMP in case of sudden excessive power consumption by a defect camera for example.
Active management of the PoE-performance
The PoE-ports can be started by time intervals so as to prevent an overload of the PoE power supplies.
Extra high backplane performance for a smooth video transmission with all ports assigned. Support of Jumbo Frames up to 9600Bytes by 100MBit/s. MAC-address restriction ensures port security.
|PoE:PoE adjustable per port PoE can be activated time-delayed per port PoE per Port: Turn on and turn off can be adjusted by means of a time table Link status control, reboot in case of non-reply of PoE-sink
DMS (Device Management System)
This switch disposes of an integrated network monitoring and control system which gives the user a good overview over the whole network in an easy way. This DMS-system has the following qualities:
Graphical network map
The network map gives a quick overview over all switches and terminal devices such as IP-cameras or servers indicating the IP-address, type of device and equipment. Plans and maps can be saved as background pictures and thus enable the user to access to certain devices without knowledge of the entire IP-structure.
This function enables the access to a specific device also in large networks. Recently added devices, as per example a new IP-camera, are immediately displayed and thus enable a direct access.
Data traffic display
Graphical display of data traffic per port in a time axis.
Error handling and security
Network diagnosis between master switch and terminal devices. Protective mechanisms such as data flow restriction guarantee an effective protection against inadvertent access. IEEE802.3ah and IEEE802.1ag provide tools for structuring of networks.
To download the firmware you need access. Please log in or register. The registration must be activated by us.
|Max. 40W (without PoE) / 255W (with PoE 185W) / 450W (with PoE 370W)
|0°C up to 40°C
|442 x 211 x 44mm (BxTxH)
24 x 10/100/1000TX, RJ45, thereof 24 with PoE+ 802.3af/at
|optical fibre ports
|4 x 100/1000SFP
We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs of other manufacturers.
|Console, Web GUI, SNMPv1, v2c und v3 (USM)
|Port disable/enable. Auto-negotiation 10/100/1000Mbps. Flow Control disable/enable. Data rate control on each port. Max. framesize, power control
|Display per port: Speed link status, flow control status. Auto negotiation status, trunk status.
|VLAN based on: 802.1Q Tagged, Port, Protocol, IP subnet, Privat (PVE), MAC
Max. 4k VLANs
Q-in-Q (double tag)
GARP VLAN registration protocol (option)
|IEEE 802.3ad LACP
|Supports 8 hardware queues
Strict priority and weighted round-robin (WRR)
Queue assignment based on DSCP and class of service
|SSH v1 und v2
SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch
ACL mit MAC, IP, MUlticast u.v.a.
|IGMP v1/v2/v3 snooping, bis 1024 Multicast Gruppen, Source-Specific Multicast, IGMP Proxy
|STP, RSTP, MSTP
|IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1s Multiple spanning tree protocol
IEEE 802.1p Class ofservice
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af/at Power over Ethernet
IEEE 802.az Energy Efficient Ethernet
|Switch with 370W for PoE